M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
27
To end the charge and discharge work, short press
[OK], move the cursor to [Stop working], short press
[OK], stop work and return to the main interface.
When charging is completed or an error occurs
during charging, a prompt box pops up and a tone
sounds.
Display content description:
24.00V：
Input power supply voltage
9A：Input power current
20.0Wh：Total power consumption of input power
45.0℃：
Charger internal temperature.
V: Constant pressure sign. C：Constant current sign.
F: Current limit sign. P: power, I: Input overcurrent, C:
Maximum current, A: Activate charging, F: The main
port is full voltage or a single chip is full voltage.