M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
20
7，Current setting
Move the cursor to the position of [Charge Current]
or [Discharge Current] and press [OK] to modify the
current. Rotate the [Scroll Wheel] to adjust the value and
step 0.1A. Quickly scroll [Scroll Wheel] to quickly increase
or decrease. The charger supports up to 15.0A. In
synchronous mode, maximum support 25A.
===================================
Tips：
1. Please set the charging rate of 1-2C according
to the battery capacity.
For example: For a battery with a capacity of 2000mAh,
please set the charging current to 2.0-4.0A as
appropriate.
2. Charging and discharging current are only valid