M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
19
voltage, and the range is plus or minus 50mV of the full
voltage. When the working mode is discharge, it is the
discharge cut-off voltage. Scroll the [Scroll Wheel] to
adjust the value in steps of 0.01V.
===================================
1，Only LiPo, LiHV, LiFe batteries can set the end
voltage.
2 ， If not familiar with battery characteristics,
please do not modify the cut-off voltage.
3，The charging cut-off voltage can be set to a
range of plus or minus 50mV of full voltage.
4, Glossary explanation:
TVC: English abbreviation for terminal voltage control
===================================