M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
17
M6D supports two discharge modes.
1. Inter (Internal) Mode, discharge through internal
heat consumption, maximum support 3.0A@12W
discharge.
2. Recycle mode, when the input is a suitable
battery, this function can recover the electric energy
from the discharging battery to the input battery, the
maximum support is 15.0A@250W discharge.
5，Input MaxVoltage
When the discharge mode is selected to recycle, the
battery setting interface will increase the input MaxVol
setting. As shown below.