M4AC Manual V1.0

@ToolkitRC 2020
7
Quick start
1，Connect the M4
AC
to a suitable 100-240V AC to
power outlet.
2，The display shows the boot logo and stays for 2
seconds.
3，After booting up, the screen enters the main
interface as shown below:
4，Short press [Type/Current] key to release the locked
state.
5，Long press [Type/Current] key to select the cut-off
voltage to be charged.
6，Short press [Type/Current] key to select the current
to be charged.
7，When the output main port and the balance port
voltage match, it will automatically start charging.