M4AC Manual V1.0

@ToolkitRC 2020
14
Terminal voltage setting and
manual calibration
Before connecting to the power supply, press and
hold [Type/Current] key to enter the calibration mode,
as shown below:
Terminal volte: The terminal voltage after the battery is
fully charged. Each battery allows to modify the voltage
range of plus or minus 10mV.
Calibration voltage: Battery calibration voltage, if the cell
voltage readings appear to be incorrect, use a
high-quality voltage meter to measure the actual
voltage, and then set this value to be the same as the
meter. To achieve voltage calibration.
DEFAULT: Restore to factory default.