Q4 ACDC Quad Battery Charger - Manual

@ToolkitRC 2022
12
2，Number of cells
Move the cursor to the position of “Cells”, press [OK] to
modify the number of battery cells. The display is as
follows:
Scroll [Scroll Wheel] to adjust the value. When set
to ”Auto”, the charger will automatically identify the
number of cells connected to the battery according to
the battery voltage connected to the output port. Short
press [OK] and [CH/Exit] to take effect and return to the
previous interface.
=================================
Tips: 1, Over discharge or overcharge of the connected
battery may cause battery cell identification errors.
2, If the cell number is set incorrectly, it may be
insufficient to charge, or overcharge may damage the battery,
please set it carefully. 3, After Lixx batteries are connected to
the balance port, the number of battery strings can be more
accurately identified.
==================================================