TLK-M8-B ToolkitRC M8 Manual V1.4

@
ToolkitRC
2019
34
System settings
After selecting the [Settings] function on the main
interface, press the OK key to enter the function
display the following interface, rotate the [Jog] to
switch to the second interface, as shown below
Function Description:
Minimum input voltage: Below this voltage, the
device will stop the main port output.
Maximum input power: The maximum power
obtained from the input port during charging.
Safe operating temperature: above this temperature
value, the device will stop the main port output
Safe charging time: The maximum time for
continuous charging and discharging, will stop
working if it exceeds
Discharge mode: Can be set to normal discharge,
discharged by internal heat dissipation. Or recycle
the discharge and recover the energy to the input
power source (the input must be rechargeable