Manual

@
ToolkitRC
2019
6
Product description
M8Sis a multi-function charger and discharger
that integrates receiver and servo test functions
along with power supply functions.
• Lipo. LiHV. LiFe Lion1-8S. NiMh 1-20s. PB 1-12s
battery charging and discharging and balance
management
•Charging current: Maximum 18A @400W
•Discharge Current: Recovery MAX 18A@400W
normal mode MAX 5A @20W
•Lithium battery full voltage can be set (TVC)
• can measure battery voltage. battery internal
resistance. lithium battery balance management
•ESC power meter 400W@18A, simultaneous output
voltage and throttle signal.
•Measurement of signal values such as PWM/PPM/
SBUS with accuracy of up to 1us
• can output PWM/PPM/SBUS standard signal.
accuracy up to 1 microseconds
• constant current constant voltage source output.
can customize 1-30V constant voltage. 1-18A
constant current
• can be adapted to the mainstream UAV battery.
automatically activated and charged.
•USB 2.1A@5.0V output. rechargeable mobile device.
•Device simulation for USB flash drive. copy upgrade
file to achieve product firmware upgrade