Manual
Table Of Contents
- Introduction
- Key Points
- Safety
- M8SLayout
- Quick start
- Charge and discharge
- 1. Battery type setting
- 2. Cutoff voltage setting（TVC）
- 3. NiMH Setting（PeakV）
- 4. Battery Setting
- 5. Current setting
- 6. Working mode
- Battery Measurement
- ESC Wattmeter
- Signal output
- Power output
- Drone charging
- System settings
- Other functions
- Specification
@
ToolkitRC
2019
37
System settings
After selecting the [Settings] function on the main
interface. press the [OK] key to enter the function
display the following interface. Rotate the [knob] to
switch to the second interface. as shown below
Function Description:
Minimum input voltage: Below this voltage. the
device will stop the main port output.
Maximum input power: The maximum power
obtained from the input port during charging.
Safe operating temperature: above this temperature
value. the device will stop the main port output
Safe Exter. Temp.: External temperature sensor above
this temperature value. the device will stop the main
port output
Safe charging time: The maximum time for
continuous charging and discharging. will stop
working if it exceeds