Manual
Table Of Contents
- Introduction
- Key Points
- Safety
- M8SLayout
- Quick start
- Charge and discharge
- 1. Battery type setting
- 2. Cutoff voltage setting(TVC)
- 3. NiMH Setting(PeakV)
- 4. Battery Setting
- 5. Current setting
- 6. Working mode
- Battery Measurement
- ESC Wattmeter
- Signal output
- Power output
- Drone charging
- System settings
- Other functions
- Specification
@
ToolkitRC
2019
36
output from the main port.
20:00 Working hours
In: 15.0V: Input voltage.
37 °C: Current internal temperature of the device.
CV CC: Working mode. CV: constant voltage CC:
constant current
===============================
Tip:
1. There is no need to open the battery
before charging. Automatic activation and charging
===============================
Important:
1. Do not charge the normal battery in this
working mode. otherwise the battery may be
damaged or the device may be damaged.
===============================