Manual
Table Of Contents
- Introduction
- Key Points
- Safety
- M8SLayout
- Quick start
- Charge and discharge
- 1. Battery type setting
- 2. Cutoff voltage setting（TVC）
- 3. NiMH Setting（PeakV）
- 4. Battery Setting
- 5. Current setting
- 6. Working mode
- Battery Measurement
- ESC Wattmeter
- Signal output
- Power output
- Drone charging
- System settings
- Other functions
- Specification
@
ToolkitRC
2019
32
etc.. Press up or down. and switch the 16 channel
value and status bit. The display interface is as
shown below (9-16 channel and status display
interface diagram omitted) Rotate the [knob] to
move the cursor to the value of the channel to be
modified. Press [OK] to modify the output pulse
width value of this channel.