Manual
Table Of Contents
- Introduction
- Key Points
- Safety
- M8SLayout
- Quick start
- Charge and discharge
- 1. Battery type setting
- 2. Cutoff voltage setting（TVC）
- 3. NiMH Setting（PeakV）
- 4. Battery Setting
- 5. Current setting
- 6. Working mode
- Battery Measurement
- ESC Wattmeter
- Signal output
- Power output
- Drone charging
- System settings
- Other functions
- Specification
@
ToolkitRC
2019
17
When selected as [DisCHG]. it will prompt the target
voltage to discharge the battery to. If the discharge
mode is to recycle the discharge. it is also necessary
to set the cutoff voltage of the battery being used as
the power source. As shown
=================================
Tip: 1,To use energy recovery discharge mode
(recycle) please read the details on setting
discharge mode on page 37 of this manual.
=================================