Manual

@
ToolkitRC
2019
14
the charger will automatically recognize the number
of cells on the connected batteries according to the
voltage of battery which connected with output port
=================================
Tip:1. the battery which was over- discharged
or over-charged. may cause the number of
cells to be recognize falsely. you need to manually
set the correct number of cells.
2. If the number of cells was set incorrectly. The
battery cannot be full charged. or be overcharged
and damaged. please set it carefully.
After the Lixx battery is connected to the
balance port. the number of battery cells can be
more accurately identified.
===============================