Installation Guide
Fig
. 14
Fig
. 13
1 3
42
Screw
ST4x10
Screw
ST4x10
Ø 1/8”
10.
ATTENTION:
Do not drill all the way through
the Expanding rail, only through
the first layer.
See Fig. 14 for details.
10/06/22 Rev.1.0
11
View from insideView from inside
Using Ø 1/8” drill to drill the holes
separately wall jamb(02)&(11), and
then using screws ST4x10(04)
separately to fix the fixed panel(06)
and wall jamb(02), door assembly
aluminum(15) and wall jamb(11).
Finally use cap of screws covers the
screws.
9.
See Fig. 13 for details.
After the rubber strip is installed, cover the screw cap of Pivot.
4
2
5
11