Installation Guide

10/06/22 Rev.1.0
10
Fig
. 12
8. Attach the F-seal (12) to the vertical edge of the
Fixed panel.
Attach the Magnetic stripe (14) to the vertical edge of the
Door panel.
7.
Open the door and attach the Bottom door gasket-A/B(9/10)
Bottom door gasket-A/B(9/10)
to the
bottom of the door glass from the pivot to the edge of the magnetic
strike rail and trim off the excess. Next, attach the cut off to the
bottom of the door glass, opposite of the pivot and trim to fit.
Attach both pieces of the to the
bottom edge of the Glass door.
See Fig. 12 for details.
See Fig. 10 & Fig. 11 for details.
View from inside
Fig. 11
Fig. 10
Install the door glass and Pivot, pay attention
to install as below image shown.
top
bottom
7
7
6
16
3
14
2
1
16
10
9