Installation Guide

When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children,
invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
furnishing to a service center for examination and repair.
furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the furnishing with the air openings blocked. Keep the air openings
free of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
11. For grounded products the following st tement:
"WARNING: Risk of Electric Shock Connect this furnishing to a properly grounded outlet only.
See Grounding Instructions."This product is for use on a nominal 120-volt circuit and has
a grounding plug that looks like the plug illustrated as below, Make sure that the product
is connected to an outlet having the same configuration as the plug. No adapter should
be used with this product.
12. Mount furnishings at the correct height.
12. Mount furnishings at the correct height.
13. Mount only approved work surfaces and secondary surfaces (shelves) in accordance with instructions.
Failure to do so may cause instability, collapse, or failure of electrical components.
[Applicable to furnishings that are not provided with a work surface and/or secondary surfaces (shelves)].
SUITABLE FOR DAMP LOCATIONS [CONVIENTAUX EMPLACEMENTS HUMIDES]
For Household / Residential Use Only [POUR L'USAGE MÉNAGER / RÉSIDENTIEL SEULEMENT]
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Give powerful tools for a kiss