Use and Care Manual

Bathroom Sinks
For best results, keep the following in mind when caring for
your toolkiss product:
Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
Wipe surfaces clean and rinse completely with water
immediately after applying cleaner. Rinse and dry any
overspray that lands on nearby surfaces.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an
abrasive material such as a brush or scouring pad to clean
surfaces.
* Success with cleaners and procedures is dependent upon
such factors as the hardness and temperature of the
water, using exact measurements of ingredients, changes in
cleaning formulas and the condition of the product being
cleaned. Since there are variations within these factors,
Toolkiss cannot guarantee the effectiveness of the formulas.
____________________________________________________
_________________________________
Rinse thoroughly and use a soft cloth to wipe the product
dry after each use.