Instructions
31
d) Automatic suction shut-off (wet vacuum)
The product features protection against overlling during wet vacuuming. If the maximum water capacity of
the container is reached, a safety valve closes an air inlet to the engine unit. If this happens a loud noise
will be heard. Switch the product off and empty the container.
11. Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these can damage the
casing or even impair the function.
Always disconnect the product from the power supply before cleaning it.
Part Cleaning
Container (5)
• Rinse the container with clean water.
• Clean the outside with a damp cloth and a mild detergent.
• Allow the container to air dry before vacuuming dry material.
Motor unit (11)
• Make sure no liquid enters the motor unit.
• Clean the motor unit with a dry, soft, lint-free cloth.
Sponge lter (10)
• Rinse the lter with clean water.
• Allow the lter to air dry.
Cartridge lter (19)
• Shake off any dust, taking care not to damage the cartridge lter.
• Rinse the lter with clean water.
• Allow the lter to air dry completely before using.
Suction hose (8),
tubes (7) and tips
(16)(17)(24)
• Rinse these parts with clean water.
• Clean the outside with a wet rag and a mild detergent.
• Allow the parts to air dry.