Instructions

26
1 ON/OFF/Sync switch
O = OFF, I = ON, II = Sync
2 Synchronized power socket
3 Latch
4 Air inlet
5 Container
6 Front casters
7 Metal extension tube
8 Suction hose
9 Hose connector
10 Foam sleeve lter Motor unit
11 Motor Unit
12 Mains cable
13 Lower cable coil
14 Nozzle holders
15 Rear wheels
16 Wet and dry oor tip
17 Round brush tip
18 Nozzle
19 Cartridge lter
20 Handle / top cable coil
21 Filter clearing button
22 Foam exit lter (behind grill - not replacable)
23 Slot for wet and dry oor tip
24 Crevice tool tip
8. Assembly
a) Removing the motor unit / accessing the container
Before removing the motor unit (11) from the container (5), disconnect the vacuum from the power supply.
Remove any items stored in the container before using the vacuum.
• Pull the latches (3) up on each side of the container (5).
• Lift the motor unit (11) up and away from the container (5).