Manual

34
1Loading staples
1. Remove the battery (11) from the device.
2. Turnthecordlessnailguntothesidesothatthebeltclip(10)pointstowardyou(topview).Thisensuresthatany
remaining nails or staples will not fall out unintentionally.
3. Press the release button on the magazine (6) and pull the magazine cover back as far as it will go.
4. Toloadthestaples,turnthecordlessnailguntotheside(inclinedposition)andtiltitslightlybackwards.Thetips
ofthestaplesshouldpointtowardsthestaplerhead.Thetopofthestaplesshouldbeontheupperguide(towards
the device housing) of the magazine compartment.
5. Slide the magazine cover (6) forwards again until the release button clicks into place.
6. Place the rechargeable battery (11) back into the device.
7. Thedeviceisnowreadyforuse.Tocheckthefunctionandthepenetrationdepth,performafewtestshotsona
test workpiece.