Manual

33
- Removethedevicefromtheworkpiece.Thestaplerheadandtriggercatch(5)mustreturntothereleased
starting position.
- Pullthetrigger(2).Thecordlessnailgunmustnottrigger.
Do not use the cordless nail gun if it triggers during this test without the trigger lever (2) bring pulled.
Risk of injury!
- Press the stapler head and trigger catch (5) against the workpiece and pull the trigger (2); the device must
trigger.
a) LED light
TheLEDlight(7)canbeswitchedonwiththebutton(3)andisdesignedtoilluminatetheworkareainpoorlight
conditions.Ifthebutton(3)orthedeviceisnotusedforlongerthanapprox.30seconds,thelightwillswitchoff
automatically.
b) LED status indicator
TheLEDstatusindicator(8)providesinformationaboutthedevicestatus.
1LED indicator 2Problem 3Solution
Red LED "on" Battery empty Replace or charge the battery
RedLED"ashing" Thenails/staplesare
jammed
Remove the nail/staple (see "Removingajammed nail or
staple")
GreenLED"on" No nails or staples in
the magazine
Rellstaplesornails
GreenLED"ashing" Overheating Allow the device to cool down
c) Insert staples or nails into the magazine
 Iftheredindicatorisvisibleonthemagazinecover,thisindicatesthatthereareonlyafewornostaplesleft
in the device.
 Tollthemagazine(6),holdthedeviceinsuchawaythatthemouthisnotdirectedtowardsyouorother
people.
Do not insert staples or nails of different lengths or a combination of staples and nails!