Manual
c) Electrical Connection
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains
socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
• For safety reasons, always unplug the device during thunderstorms.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress. Avoid excessive thermal stress on the mains cable from extreme heat or
cold. Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged
mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains
socket. Never use the product if the mains cable is damaged.
• To prevent risks, damaged power cables may only be replaced by the manufacturer, a profes-
sional workshop appointed by the manufacturer, or a similarly qualied person.
• Never plug in or unplug the mains plug when your hands are wet.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
d) Operation
• Never touch the barrel or tip of the soldering iron during use. Risk of burns!
• Never use the soldering iron to heat up liquids.
• Never solder live electrical components or parts. Always switch off the power before-hand.
• Do not cover or fasten any items to the soldering iron. Otherwise there is a risk of re.
• Touching or soldering capacitors (or similar components) or leads/cables that are connected
to capacitors may cause a fatal electric shock! Capacitors may stay charged for several hours
after you switch off the power supply!
• Always solder on non-ammable surfaces. Protect other materials nearby from damage
through heat.
• Risk of re or explosion! Do not use around or near explosive or ammable materials.
• Turn the power off and place the soldering iron on the stand while taking breaks or not
using.
e) Work Safety
• Ensure that there is sufcient lighting.
• Ensure proper ventilation during soldering. Solder and ux vapours can be harmful to your
health.
• Wash your hands thoroughly after working with solder. This is particularly important when
using lead-based solder.
• Do not put soldering alloys into your mouth. Do not eat or drink during soldering.
• Wear suitable protective clothing and safety goggles when soldering. Liquid/splashing solder
may cause serious burns or eye damage.
• For installations in industrial facilities, follow the accident prevention regulations for electrical
systems and equipment of the government safety organization or the corresponding authority
for your country.
Stand
Do not overbend or adjust the height too many times as this may break the metal.
Maintenance and Care
• Always keep the tip tinned before switching off or storing for any period of time.
• Never clean the tip with coarse, abrasive materials like les.
• If oxide forms on the tip, lightly rub with abrasive paper, wipe clean, then immediately reheat and re-tin
the tip to prevent oxidation of the wettable surface.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulll your statutory obligations and contribute to the protection of the
environment.
Technical Data
Input voltage ..................... 230 V/AC 50 Hz
Power ............................... 60 W
Heat up time ..................... 5 - 10 minutes
Operating conditions ......... +15 to +40 ºC, 0 - 90 % rH (non-condensing)
Storage conditions ............ +15 to +40 ºC, 0 - 90 % rH (non-condensing)
Important Information
Soldering Iron
Item No. 2309668
Item No. 2203095
Intended Use
The product is a soldering iron. A grounded power cable provides additional safety during use. It comes with
a soldering iron stand and connects directly to a mains power outlet.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, res, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Soldering iron
• Stand
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an
electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
Safety Instructions
If you do not follow the safety instructions and information on proper handling, we as-
sume no liability for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) Important safety information
• This equipment is not intended to be used by per-
sons (including children) with limited physical, sensory
or mental capabilities or lack of experience and / or
knowledge, unless they are supervised or received by
a person responsible for their safety instructions from
her on how to use the device.
• Children should be supervised to ensure that they do
not play with the tool.
• Cleaning and user maintenance shall not be made by
children without supervision.
b) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can dam-
age the product.
• Consult an expert when in doubt about the operation, safety or connection of the appliance.
• Maintenance, modications and repairs must only be completed by a technician or an au-
thorised repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2309668_2203095_v1_1021_02_dh_ss_en