User manual

45
16. Image Backup (USB Mode)
You can save images directly to your computer without going through the bundled software.
• Connect one end of the supplied USB cable to the USB port (A17) on your microscope, and the other end to an
available USB 2.0 port on your computer.
• Press the power
button to turn the microscope ON.
• From the menu select UPLOAD IMAGES, then press OK. The microscope will appear on your computer as an
external USB storage device USBSTORAGE.
• Select the applicable drive letter and navigate to the folders named PHOTO or VIDEO to access your saved images.
• Copy images to the desired location on your computer.
17. Tripod Mount
Do not use force to screw the tripod into the mount as this may damage the screw hole.
• You can use the tripod mount (A3) to mount a tripod (not included) to the microscope.