User manual

44
15. Connect to Television
Youcanuseyourtelevisionscreenasalargedisplayforviewingmagniedobjects.
• Connect the supplied AV cable to the AV-out television cable port (A18) on the microscope, and the other end to
the video input on your television.
• Press the power
button to turn the microscope ON.
• Press
to switch between photo or video modes.
- An
icon on the LCD display (A19) indicates that you are in Photo mode.
- An
icon on the LCD display (A19) indicates that you are in Video mode.
• Press
to enter the microscope settings.
• Press
to switch to “Setup”.
• Press
or and select “TV Out”, then press OK.
• Press
or and select “NTSC” or “PAL”, then press OK.
• Press
to exit the microscope settings.
• Select the appropriate input channel on your television.
 Refertoyourtelevisionoperatingmanualforinformationaboutwheretolocatethevideoinputs,andhow
to select the input channel screen.
Video-in on TV monitor
Video-out