Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 1. Identification of the substance/mixture and of the company/undertaking Product: Cold spray/aerosol (Kältespray/Spraydose) Manufacturer: Conrad Electronic SE Address: Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone: +49 (0) 9604 / 40 - 8988 Erstellungsdatum: 16.04.2019 1.1. Product identifier Cold spray/aerosol (Kältespray/Spraydose) 1.2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 2. Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Physical: Aerosol, category 3 Pressurised container: May burst if heated. Health: Not classified Environment: Not classified Other hazards: Avoid contact with skin and eyes, in case of contact with liquid product frostbite symptoms may occur. 2.2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 4. First aid measures 4.1. Description of first aid measures Contact with eyes: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Contact with skin: In case of contact with liquid, thaw frosted parts with water, remove clothing carefully and wash with soap & water. Seek medical advice. Inhalation: Fresh air, keep warm and at rest.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 6. Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Shut off all ignition sources Ensure adequate ventilation Wear suitable protective clothing and gloves. 6.2. Environmental precautions Do not allow to enter public sewers and watercourses 6.3. Methods and material for containment and cleaning up Allow product to evaporate 6.4.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 8. Exposure controls/personal protection 8.1. Control parameters Exposure limits: No information available 8.2. Exposure controls Control procedures: Ensure adequate ventilation Keep away from heat and sources of ignition Personal protection: Take precautions to avoid contact with skin and eyes when handling the product.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 9. Physical and chemical properties 9.1.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 11. Toxicological information 11.1.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 12. Ecological information 12.1. Toxicity Ecotoxicological data: No information available 12.2. Persistence and degradability Not readily biodegradable 12.3. Bioaccumulative potential For all ingredients the octanol-water partion coefficient is below 4. 12.4. Mobility in soil No information available 12.5. Results of PBT and vPvB assessment No information available 12.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 14. Transport information 14.1. UN number UN-number: 1950 14.2. UN proper shipping name Proper shipping name: AEROSOLS 14.3. Transport hazard class(es) Class: 2.2 ADR/RID - Classification code: 5A 14.4. Packing group Packing group: Not applicable. 14.5. Environmental hazards ADR/RID - Environmentally hazardous: No IMDG - Marine pollutant: No IATA/ICAO - Environmentally hazardous: No 14.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 887253 Material Safety Data Sheet 15. Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture The Safety Data Sheet is compiled according to the current European requirements. Regulation (EC) No 1907/2006 (REACH) Regulation (EC) No 1272/2008 (CLP) Dir. 2013/10/EU, 2008/47/EC amendment of the aerosol dispenser directive 75/324/EEC. 15.2.
