User manual

13. Technical data

a) General information

Ambient conditions Temperature: 0 °C to +45 °C, humidity: 10% to 85%

relative humidity, non-condensing

b) Stapler

Power supply Li-ion battery (single cell), rated voltage 3.6 V, capacity

1.3 Ah, non-replaceable

Staple output Up to 30/min

Staple dimensions 53/530 (6 - 12 mm)

Sound pressure level L

80.73 dB(A)

Sound power level L

91.73 dB(A)

Uncertainty K

& K

3 dB(A)

Vibration emission a

2.628 m/s²

Uncertainty a

1.5 m/s²

Dimensions (L x W x H) 151 x 160 x 49 mm

Weight 0.8 kg

Caution!

The noise level of the stapler can exceed 80 dB(A). Wear suitable ear protectors to prevent hearing dam-

age.

The vibration emission value stated in this manual was obtained using a standardized EN 60745 test pro-

cedure. The result can be used to compare vibration levels of different electrical tools. It can also be used

to obtain a preliminary estimate of your exposure to vibrations.

 Thespeciedvalueindicatesthevibrationlevelwhenthetoolisusedforitsintendedpurpose.Theactual

vibrationlevelmaydifferfromthespeciedvalueifthetoolisusedforotherpurposes,ifothertoolsare

inserted, or if the tool has not been maintained properly. These factors can considerably increase your

exposure.

For an accurate estimate of your exposure, account for the times when the stapler is switched off or not in

use.Thiscanresultinasignicantlylowerestimate.

Use additional safety measures to protect yourself against the impact of vibrations. These may include

servicing the stapler and any accessories, keeping your hands warm, and standardizing operating proce-

dures.