Datasheet

Version Nr.: 1.0
Revision Nr.: 1.0
Datum: März 2014
Technical data sheet „911 Polyimide Film Silicone Tape“
Product description
#911 is manufactured from high performance polyimide film with special silicone adhesive. Meet UL
510. With temperature rating for flame retarding to 200°C. It is also designed for insulating coil at
high temperature as well as for the application of generator, capacitor, transformer etc.
- Excellent mechanical and electric properties
- High conformability
- Good adhesive property, excellent holding and wrapping request
Technical Data Normal Minimum Test method
Adhesive Silicone
Carrier Polyimide Film
Carrier Thickness (mil/mm) 1,00/0,025 ASTM D 1000
Total Thickness (mil/mm) 2,56/0,064 2,48/0,062 ASTM D 1000
Colour Amber
Adhesion to Steel
(N/25mm)/(g/25mm)/(oz/in) 7,0/710/25 5,6/570/19,9 ASTM D 1000
Tensile Strength
(N/25mm)/(g/25mm)/(lb/in) 118/12/26 98/10/22 ASTM D 1000
Elongation (%) 80 60 ASTM D 1000
Dielectric Strength (kV) 6,5 6 ASTM D 149
Class of Insulation (°C) UL H / 200 UL 510
Range of Temperature (°C/°F) -73 ~ 260 / -100 ~ 500
Note: The above data should be considered representative only and should not be used for specification purposes.
The Statements in this information sheet are based upon our knowledge and practical experience. This data is intended
only as a source of information and is given without guarantee and does not constitute a warranty. Suggestion for use and
final results on our best technical experiences but cannot be intended as our commitment or liability. The company
reserves the right to modify or change the products at any time without notice. All information has to be intended as
generic advise for the use of products. Users have to verify the suitability of each tape in actual application under specific
conditions.
Seite 1 von 1