Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
BREMSENREINIGER
Creationdate :
11.02.16 Version : 3.0
Ref.Nr.:
BDS000141_3_20160211 (EN)
Replaces:
BDS000141_20130621
5 / 10
7.3. Specific end use(s)
Cleaners - Heavy duty
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
carbon dioxide
124-38-9
TWA
5000 ppm
propan-2-ol; isopropyl alcohol ;isopropanol
67-63-0
TWA
400 ppm
STEL
500 ppm
acetone; propan-2-one; propanone
67-64-1
TWA
500 ppm
National established exposure limits, United Kingdom
carbon dioxide
124-38-9
TWA
5000 ppm
STEL
15000 ppm
propan-2-ol; isopropyl alcohol ;isopropanol
67-63-0
TWA
400 ppm
STEL
500 ppm
acetone; propan-2-one; propanone
67-64-1
TWA
500 ppm
STEL
1500 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
Recommended gloves:
(neoprene)
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Depending on amount and duration of use and the risk of contact with the
product the gloves manufacturer can assist you in the selection of the right
glove material and breakthrough time.
eyes :
Wear safety goggles according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties