Safety data sheet

TOOLCRAFT Thixotropy-enhancing agent
Safety Data Sheet
Product code: 886596
Print date: 03.02.2011 Page 2 of 3
according to Regulation (EC) No. 1907/2006
raise of dust. Dispose in correct labeled vessel.
7. Handling and storage
Handling
Avoid contact with skin and eyes. Store product in sealed receptacles. Do not breathe dust. Provide
adequate ventilation/vapour extraction at the workplace. Don't use a brush or compressed air to
prevent the raise of dust. Take precautionary measures against static discharges. All machineparts out
of metal must be earthed.
Further information on handling
Storage
Keep container tightly closed in a cool, well-ventilated place.
Requirements for storage rooms and vessels
8. Exposure controls/personal protection
Exposure limit values
Exposure controls
TRGS 900 4 mg/m3, TWA, einatembarer Staubanteil (a)
Occupational exposure controls
Not necessary when the room is well ventilated.
Respiratory protection
Apply protective skin cream. Wear protective gloves.
Hand protection
Wear goggles.
Eye protection
Wear protective clothing.
Skin protection
9. Physical and chemical properties
General information
white
Powder
Physical state:
Colour:
odourless
Odour:
Important health, safety and environmental information
Test method
pH-Value:
3,6 - 4,5
Changes in the physical state
1700 °CMelting point:
2230 °CBoiling point:
Density (at 20 °C): 2,2 g/cm³
Water solubility:
insoluble
10. Stability and reactivity
Keep away from heat and ignition sources.
Conditions to avoid
Revision no.: 1,00 Revision date: 01.03.2010 GB - EN