Certifications 2
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no. : 886593
Material Safety Data Sheet
8. Exposure controls/personal protection
8.1. Control parameters
8.2. Exposure controls
Protective and hygiene measures
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and
face before breaks and after work and take a shower if necessary . When using do not eat or drink.
Eye/face protection
Suitable eye protection: goggles.
Hand protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits.
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place
concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to
chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Suitable material: FKM (fluoro rubber), NBR (Nitrile rubber) Thickness of the glove material: > 0,5mm
Skin protection
Wear suitable protective clothing.
Respiratory protection
In case of inadequate ventilation wear respiratory protection. ABEK-P2
Page 5 of 12