Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 886592
Material Safety Data Sheet
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state: liquid
Colour: white
Odour: characteristic
Changes in the physical state Test method
Melting point: > 140 °C
Flash point: > 24 °C DIN EN ISO 2719
Lower explosion limits: 0,6 vol. %
Upper explosion limits: 7,0 vol. %
Ignition temperature: > 200 °C
Vapour pressure: 5 hPa (at 20 °C)
Vapour pressure: (at 50 °C) 24 hPa
Density (at 20 °C): 0,78 g/cm³ DIN 51757
Water solubility: (at 20 °C) 0,1 g/L
Solubility in other solvents
Mixable with most organic solvent cleaners
Viscosity / kinematic: (at 40 °C) < 20,5 mm²/s DIN 53015
Flow time: (at 23 °C) 23 s 3 EN ISO 2431
Evaporation rate: (at 20 °C) 0,6 n-BuAc=1 ASTM D 3539
10. Stability and reactivity
10.1. Reactivity
Stabile under the specified storage conditions.
10.2. Chemical stability
Stabile under the specified storage conditions.
10.3. Possibility of hazardous reactions
No hazardous reaction when handled and stored according to provisions.
10.4. Conditions to avoid
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
10.5. Incompatible materials
Oxidizing agents.
10.6. Hazardous decomposition products
No known hazardous decomposition products.
Further information
No decomposition when stored and handled properly
Page 9 of 15