Certifications 2

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
TOOLCRAFT Zink-Alu-Spray
Material number Zink-Alu-Spray
Revision date: 25/8/2020
Version: 1
Language: en-GB,IE
Date of print: 30/9/2020
Page: 4 of 19
Following skin contact:
Wash with generous amount of water and soap. Take off contaminated clothing and wash
it before reuse. In case of skin reactions, consult a physician.
After eye contact:
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently
consult an ophthalmologist.
After swallowing:
Do not induce vomiting. Immediately get medical attention. Rinse mouth immediately and
drink plenty of water. Never give anything by mouth to an unconscious person.
4.2 Most important symptoms and effects, both acute and delayed
Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if
swallowed and enters airways. Causes skin irritation.
Inhaling can lead to irritations of the respiratory tract and mucous membrane.
Higher doses may lead to a narcotic effect.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media:
Extinguishing powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Water
5.2 Special hazards arising from the substance or mixture
Extremely flammable aerosol. Pressurised container: May burst if heated. Potentially
explosive vapour/air mixtures may form.
During fire: produces thick black smoke that may be hazardous to health. Furthermore,
there may develop: Carbon black, aldehydes, hydrocarbons, nitrogen oxides (NOx),
carbon monoxide and carbon dioxide.
5.3 Advice for firefighters
Special protective equipment for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective
clothing. Do not breathe fumes.
Additional information:
Hazchem-Code: -
Heating will lead to pressure increase: Danger of bursting and explosion.
Use fine water spray to cool endangered containers. Move undamaged containers from
immediate hazard area if it can be done safely.
In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the
risk of explosion. Fire residuals and contaminated extinguishing water must be disposed
of in accordance with the regulations of the local authorities. Do not allow fire water to
penetrate into surface or ground water.
printed by Conrad Electronic with Qualisys SUMDAT