Certifications 2

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
TOOLCRAFT Zink-Alu-Spray
Material number Zink-Alu-Spray
Revision date: 25/8/2020
Version: 1
Language: en-GB,IE
Date of print: 30/9/2020
Page: 2 of 19
Hazard statements:
H222
Extremely flammable aerosol.
H229
Pressurised container: May burst if heated.
H315
Causes skin irritation.
H319
Causes serious eye irritation.
H336
May cause drowsiness or dizziness.
H411
Toxic to aquatic life with long lasting effects.
Precautionary statements:
P102
Keep out of reach of children.
P210
Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P211
Do not spray on an open flame or other ignition source.
P251
Do not pierce or burn, even after use.
P261
Avoid breathing vapours/spray.
P271
Use only outdoors or in a well-ventilated area.
P280
Wear protective gloves/protective clothing/eye protection.
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P405
Store locked up.
P410+P412
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501
Dispose of contents/container to hazardous or special waste collection point.
Special labelling
EUH208
Contains 2-Butanone oxime. May produce an allergic reaction.
Text for labelling:
Contains: Acetone; xylene; Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics and
Hydrocarbons, C9, aromatics
2.3 Other hazards
Potentially explosive mixtures may form if adequate ventilation is not provided.
Inhaling can lead to irritations of the respiratory tract and mucous membrane.
Higher doses may lead to a narcotic effect. Danger of metabolic acidosis.
Results of PBT and vPvB assessment:
No data available
SECTION 3: Composition / information on ingredients
3.1 Substances: not applicable
3.2 Mixtures
Chemical characterisation:
Mixture of the substances listed below with non-hazardous additions:
printed by Conrad Electronic with Qualisys SUMDAT