Certifications 2

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
TOOLCRAFT Zink-Alu-Spray
Material number Zink-Alu-Spray
Revision date: 25/8/2020
Version: 1
Language: en-GB,IE
Date of print: 30/9/2020
Page: 17 of 19
Labelling of packaging with <= 125mL content
Signal word:
Danger
Hazard statements:
H222
Extremely flammable aerosol.
H229
Pressurised container: May burst if heated.
H336
May cause drowsiness or dizziness.
EUH208
Contains 2-Butanone oxime. May produce an allergic reaction.
Precautionary statements:
P102
Keep out of reach of children.
P210
Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P211
Do not spray on an open flame or other ignition source.
P251
Do not pierce or burn, even after use.
P261
Avoid breathing vapours/spray.
P271
Use only outdoors or in a well-ventilated area.
P405
Store locked up.
P410+P412
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Further regulations, limitations and legal requirements:
Use restriction according to REACH annex XVII, no.: 3, 40
Directive 2012/18/EU on the control of major-accident hazards involving dangerous
substances [Seveso-III-Directive]: P3a, E2
15.2 Chemical Safety Assessment
For this mixture a chemical safety assessment is not required.
printed by Conrad Electronic with Qualisys SUMDAT