Certifications 2

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
TOOLCRAFT Zink-Alu-Spray
Material number Zink-Alu-Spray
Revision date: 25/8/2020
Version: 1
Language: en-GB,IE
Date of print: 30/9/2020
Page: 11 of 19
SECTION 10: Stability and reactivity
10.1 Reactivity
Extremely flammable aerosol.
Vapours can form explosive mixtures with air.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Container under pressure.
Heating will lead to pressure increase: Danger of bursting and explosion.
10.4 Conditions to avoid
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other
ignition source. Protect from sunlight. Do not expose to temperatures exceeding 50
°C/122 °F.
10.5 Incompatible materials
Strong reducing agents, oxidizing agents, peroxides, halogenated compounds, alkali
metals, Ethanolamine, hydrogen peroxide, Hydrofluoric acid, oxygen, fluoro rubber
10.6 Hazardous decomposition products
No hazardous decomposition products when regulations for storage and handling are
observed.
Thermal decomposition:
No data available
printed by Conrad Electronic with Qualisys SUMDAT