Datasheet

The Statements in this information sheet are based upon our knowledge and practical experience. This data is intended
only as a source of information and is given without guarantee and does not constitute a warranty. Suggestion for use and
final results on our best technical experiences but cannot be intended as our commitment or liability. The company
reserves the right to modify or change the products at any time without notice. All information has to be intended as
generic advise for the use of products. Users have to verify the suitability of each tape in actual application under specific
conditions.
Seite 1 von 1
Version Nr.: 1.0
Revision Nr.: 1.0
Datum: Jan. 2013
Technisches Datenblatt „PVC-Putzerband/Allzweck-Klebeband“
Technical data sheet „PVC Protective Tape“
Production Specification
Product Name PVC Protective Tape
Part number 832450 …
Application Excellent for protection of metal surface during transportation &
processing
Name of backing Soft PVC (embossed)
Spec. of backing 0,13 mm (thickness) x 1330 mm (width) x 1000 m (length)
Color blue, yellow, green, grey, orange, red, black, white
Type of adhesive Rubber based
Coating thickness 15 – 17 µ
Theroetically speaking, the temperature resistant for a regular tape is between 0~36 degrees
TEST ITEM UNIT SPECIFICATION
Total thickness mm 0,140 +/- 0,017
Adhesion kg / 25 mm 0,350
Adhesion to backing kg / 25 mm NA
Initial tack # of rolling ball 20
Holding power minute 60
Tensile strength kg / 25 mm 4
Elongation % 100
Breakdown Volt. Unit NA
Volume resistivity Ω-cm NA