Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item No.: 886607
Material Safety Data Sheet
according to Regulation (EC) No. 1907/2006
8. Exposure controls/personal protection
8.1. Control parameters
PNEC values
CAS No. Substance
Environmental compartment Value
25513-64-8 2,2,4-trimethylhexane-1,6-diamine
Freshwater 0,0295 mg/l
Marine water 0,00295 mg/l
69-72-7 Salicylic acid
Freshwater 0,2 mg/l
Marine water 0,02 mg/l
8.2. Exposure controls
Appropriate engineering controls
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray.
Protective and hygiene measures
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and
face before breaks and after work and take a shower if necessary. When using do not eat or drink.
Eye/face protection
Suitable eye protection: goggles.
Hand protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits.
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place
concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to
chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Suitable material: NBR (Nitrile rubber) FKM (fluoro rubber) (Viton)
Thickness of the glove material: >= 0,5 mm
Skin protection
Wear suitable protective clothing.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
Filter type: A-P2
Page 7 of 19