User manual

36
Troubleshooting
With this digital soldering station, you purchased a product built to the state of the
art and operationally safe.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible
malfunctions yourself:
Always observe the safety information!
Error Possible cause
Soldering tip temperature is
not displayed
•
•
•
The temperature is outside of the range that
can be measured
The soldering gun is not connected.
The soldering gun is defective.
No function • Is the main switch lit when switching on?
Fuse replacement
Unintelligible characters in
the display or no operation
possible anymore.
• The processor was subject to interference.
Switch the device off and on again (reset)
Repairs other than those described above must only be carried out
by an authorised specialist.