Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 1. Identification of the substance/mixture and of the company/undertaking Product Lead free wire Manufacturer Conrad Electronic SE Address Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone +49 (0) 9604 / 40 - 8988 Date 09.11.2020 1.1. Product identifier Product name Lead free wire Product type Solid. [Cored Wire] Other means of identification Not applicable 1.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet Precautionary statements Prevention Wear protective gloves. Avoid breathing dust. Contaminated work clothing should not be allowed out of the workplace. Response If on skin Wash with plenty of soap and water. If skin irritation or rash occurs, get medical attention.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 3. Composition/information on ingredients 3.1 Mixtures Mixture Product/ingredient name Identifiers % Regulation (EC) No. 1272/2008 [CLP] Type Tin REACH # 01-2119486474-28 EC 231-141-8 CAS 7440-31-5 ≥90 Not classified. [2] Rosin EC 232-475-7 CAS 8050-09-7 Index 650-015-00-7 ≤3 Skin Sens.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 4. First aid measures 4.1 Description of first aid measures Eye contact 1. Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. 2. Check for and remove any contact lenses. 3.Continue to rinse for at least 10 minutes. 4. Get medical attention if irritation occurs. Inhalation 1. Remove victim to fresh air and keep at rest in a position comfortable for breathing. 2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet Protection of first-aiders 1. No action shall be taken involving any personal risk or without suitable training. 2. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. 3. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. 4.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 5. Firefighting measures 5.1 Extinguishing media Suitable extinguishing media Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media None known. 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture 1. No specific fire or explosion hazard. 2. Hazardous combustion products: None 3.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures For non-emergency personnel 1. No action shall be taken involving any personal risk or without suitable training. 2. Evacuate surrounding areas. 3. Keep unnecessary and unprotected personnel from entering. 4. Do not touch or walk through spilled material. 5. Provide adequate ventilation. 6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 7. Handling and storage The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information provided in the Exposure Scenario(s). 7.1 Protective measures 1. Put on appropriate personal protective equipment (see Section 8). 2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 8. Exposure controls/personal protection The information in this section contains generic advice and guidance. Information is provided based on typical anticipated uses of the product. Additional measures might be required for bulk handling or other uses that could significantly increase worker exposure or environmental releases. 8.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 8.2 Exposure controls Appropriate engineering Controls Good general ventilation should be sufficient to control worker exposure to airborne contaminants. Individual protection measures Hygiene measures 1. Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. 2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance Physical state: Color Solid. [Cored Wire] Odor: Not available. Odor threshold pH: Not available. Initial boiling point and boiling range: Not available. Melting point/freezing point: Not available Flash point: Not available. Evaporation rate: Not available. Flammability (solid, gas): Not available.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 10. Stability and reactivity 10.1 Reactivity No specific test data related to reactivity available for this product or its ingredients. 10.2 Chemical stability The product is stable. 10.3 Possibility of hazardous reactions Under normal conditions of storage and use, hazardous reactions will not occur. 10.4 Conditions to avoid No specific data. 10.5 Incompatible materials No specific data. 10.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet Teratogenicity Conclusion/Summary:Not available Specific target organ toxicity (single exposure): Not available. Specific target organ toxicity (repeated exposure): Not available. Aspiration hazard: Not available. Information on the likely: Not available. Routes of exposure: Not available. Potential acute health effects Eye contact: No known significant effects or critical hazards.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet Developmental effects No known significant effects or critical hazards. Fertility effects No known significant effects or critical hazards. Other information To the best of our knowledge, the information contained herein is accurate.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 13. Disposal considerations The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information provided in the Exposure Scenario(s). 13.1 Waste treatment methods Product Methods of disposal 1. The generation of waste should be avoided or minimized wherever possible. 2.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 14. Transport information ADR/RID ADN IMDG I ATA 14.1 UN number Not regulated. Not regulated. Not regulated. Not regulated. 14.2 UN proper shipping name - - - - 14.3 Transport hazard class(es) - - - - 14.4 Packing group - - - - 14.5 Environmental hazards No. No. No. No. Additional Information - - - - 14.6 Special precautions for user Transport within user’s premises: 1.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorization Annex XIV None of the components are listed. Substances of very high concern None of the components are listed.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no. 588226 Material Safety Data Sheet 16. Other information Abbreviations and acronyms ATE (Acute Toxicity Estimate) CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
