User manual

• Secure the large mounting screw on the loading hook (18) using

the nut, and then tighten the other two screws and nuts. Do not

overtighten the screws, otherwise the pulley may not run smoothly.

• Use a suitable spanner or other tool to hold the screws in place.

Holdthescrewheadrmlywhiletighteningthenut.

• Caution!Donotclampthewireropetothesidesofthepanel,as

this may damage the rope. It must sit exactly in the guide slot on

the roller.

c) Connection

• The mains socket that the hoist is connected to must be protected with a 10 A fuse or a 10 A residual current circuit

breaker.

• Connectthemainsplugtoasuitablemainssocketoranextensioncable.

• The cable hoist is now ready to use.

9. Before rst use

Follow the instructions below before using the hoist for the rst time:

• Readtheoperatinginstructionscarefully.

• Onlycongurethedevicewhenthemainscableisunplugged.

• The cable hoist has a lifespan of approximately 8000 cycles (excluding wearing parts). All mechanical parts must

be checked and serviced when the hoist has completed 8000 cycles.

• Ensure that the person using the hoist knows how the product functions and is aware of the necessary safety

precautions.