User manual

• The cable hoist is not suitable for moving hot and/or melted objects. It must not be used in very low

temperatures or hostile environments.

• If the hoist cannot lift an object, do not attempt to touch the switch again. This indicates that the load is

heavier than the maximum load capacity.

• Do not overload the cable hoist. Never use multiple hoists to lift one object.

• Take appropriate measures to prevent an electric shock, e.g. avoid contact with grounded metal surfaces

or moisture.

• Wear suitable protective clothing, ear/hair protection and non-slip shoes when using the hoist.

• Do not wear jewellery that may get caught in the moving parts of the hoist.

• Heavyobjectsmustonlybeliftedvertically.Donotusethehoisttopullobjectsalongtheoor.

• Protect the product from frost and cold.

• Only use the product in a temperature climate.

• Do not use the product in the rain or during storms. This product is designed for use in indoor rooms and

must not be used in adverse outdoor conditions.

• Before starting work, check that the rope is in the correct position on the roller.

• Never unroll the entire rope from the roller. Ensure that the rope is wound at least 3 times to avoid

damaging the rope connection.

• Never exceed the maximum load capacity stated on the rope (the value stated on the hook is not

relevant).

• Do not hang heavy objects at long lengths, as this may overload the components and cause an injury.

• If the steel rope wears out, replace it with an equivalent rope from a specialist repair centre. (See

diagram in "Maintenance").