Safety data sheet

TOOLCRAFT Hardener L
Safety Data Sheet
Product code: 886594
Print date: 03.02.2011 Page 3 of 7
according to Regulation (EC) No. 1907/2006
Bei unzureichender Belüftung Atemschutz. Empfohlenes Filtergerät für kurzzeitigen Einsatz:
Kombinationsfilter A-P2
Respiratory protection
Nur Chemikalien-Schutzhandscuhe mit einer CE-Kennzeichnung der Kategorie III verwenden. Zur
Minimierung der Nässe im Handschuh durch Schweißbildung ist ein Wehseln der Handschuhe
während einer Schicht erforderlich. Vor jeder erneuten Verwendung des Handschuhs ist die Dichtheit
zu prüfen. Vorbeugender Hautschutz durch Verwendung von Hautschutzmitteln wird empfohlen.
Handschuhmaterial: Nitrilkautschuk, Fluorkautschuk (Viton)
Empfohlene Materialstärke: >= 0,5mm
Hand protection
Dichtschliessende Schutzbrille
Eye protection
Arbeitsschutzkleidung
Skin protection
9. Physical and chemical properties
General information
liquid
Physical state:
Colour:
amine-like
Odour:
Important health, safety and environmental information
Test method
Changes in the physical state
> 200 °CBoiling point:
> 100 °CFlash point:
0,5 vol. %Lower explosion limits:
13 vol. %Upper explosion limits:
Vapour pressure:
(at 20 °C)
0,1 hPa
Density (at 23 °C): 1 g/cm³
Water solubility:
slightly soluble
Viscosity / dynamic:
(at 25 °C)
320 mPa·s
Other information
275 °C
Ignition temperature:
10. Stability and reactivity
Fire and decomposition may release irritant, caustic, ignitable, unhealthy, toxic gases and vapours.
Hazardous decomposition products
11. Toxicological information
6864-37-5 2,2'-Dimethyö-4,4'methylenbis(cyclohexylamin)
Oral LD50 320-460 mg/kg (rat)
Dermal LD50 200-400 mg/kg (rab)
Inhalativ LC50/4 h 0,42 mg/l (rat)
Acute toxicity
Revision no.: 1,00 Revision date: 12.03.2010 GB - EN