Assembly Instructions

Page 5
ASSEMBLE THE FRAME
Assemble one end of the workbench by
attaching two short cross braces to one
Post A and one Post B using four M6 x 16
mm hex bolts per cross brace.
Screw two adjustable feet into the bottom
of the posts.
Repeat to create the other end of the
workbench.
Connect the two ends together using two
long cross braces and eight M6 x 16 mm
hex bolts per cross brace.
ATTACH THE WORKTOP
Lay the work top upside down on a soft mat
for protection. Place the assembled frame
upside down on the worktop. The worktop
should be flush with the back of the frame,
and have equal amounts of space on the
left and right ends.
Attach the frame to the worktop using eight
M6 x 16 mm hex bolts.
ASSEMBLY