50 WATT Hot Knife Operating Manual SKU 244-9896
ATTENTION: Use caution while the Blade is still hot! Failure to do this will cause a BURN INJURY. Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. Save these instructions. 1) Work area a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b.
key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g.
Operating Instructions: 1. The cutting depth of the Hot Knife may be adjusted up to 3-3/4” when using the Scale Bracket (1). To adjust the depth, loosen the two Clamping Screws (3). Pull out or retract the Scale Bracket (1) to the desired cutting depth. Then re-tighten the two Clamping Screws. 2. Plug the Power Cord Plug (21) into a 120 volt, grounded, electrical outlet. 3. Turn the Temperature Adjusting Knob (9) to the desired temperature. may be +/- 5°. Fig A Note: temperatures listed (See Figure A.
Meaning of crossed –out wheeled dustbin Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
TOOL SHOP® 150 WATT HOT KNIFE WARRANTY 1-YEAR LIMITED WARRANTY: This TOOL SHOP® brand power tool carries a 1-Year Limited Warranty to the original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest MENARDS® retail store.
