S.p.A. Outdoor Storage User Manual

of luminance and chromaticity distribution !
Even more
convenient!
RGB image display
RGB image
display
Pseudocolor
display
Pseudocolor display
Spot display
Statistics for areas within the spots are displayed in a list, and
s
spots can be given numbers and labels.
mark makes verifying
measurement position easy.
List display of statistical values for spot areas
s
Number and comment can be input for each spot area.
s
+ mark make checking measurement position easy.
s
Indicator dial and keypad measurement examples
Automatic extraction of measurement spot areas to measure the
brightness and color distribution of small letters and indicators.
When the shapes of the light-emitting areas of the measurement
s
subject are complicated, this function extracts and measures
only the light-emitting areas.
The threshold value for extraction can be set automatically or the
s
luminance threshold value can be set to the desired value.
M
ultiple exposure function
By combining different optimum exposure
times, subjects with luminance levels from low
to high in different areas can be measured.
Measurements requiring a wide dynamic range,
such as a gray scale, can be measured.
U
ser calibration for each color region
When simultaneously measuring LEDs with different colors, for example, by calibrating for each color, high-
accuracy measurements can be performed.
Histogram display
Displays a histogram (frequency distribution) to make it easier to
observe variations in luminance and chromaticity.
Cross-section display
The horizontal and vertical cross-sections at the cursor position
can be displayed.
matching
n
of FPDs,
e
CA-2000
a
powerful
b
ject tilt
s
hift of the
m
ent.
o
ut can be
t
es.
nced nonuniformity
d
.
c
ed for easier
y
s
olid for easier
a
ll conditions.
u
rem
e