Owners manual

Limited Lifetime Warranty

 Tonno Pro offers a limited lifetime warranty against defective materials or workmanship on all aluminum rails,

aluminum components, clamps, hinges, bows and hardware.

 10 Year Vinyl – Tonno Pro uses the highest quality 24 oz vinyl in the industry. We offer a full 10 year warranty

against defective materials or workmanship on the vinyl cover.

Warranty Conditions

This warranty is against defective materials or workmanship. This warranty is void if the product has been damaged by

accident, unreasonable use, neglect, improper service or installation. Any modiﬁcation, acts of God, normal wear and

tear or other causes not arising from defective materials or workmanship is not considered under this warranty.

Examples of Conditions That Void Our Warranty:

 Wind Whip Damage – The cover must be secure to truck when vehicle is in motion.

 Improper Cleaning – The use of cleaning chemicals not approved for cleaning vinyl. Do not use products such as

Armor All. These are vinyl conditioners and will cause the vinyl to shrink or to fade prematurely.

 Overloading of Cargo – Cargo must not be allowed to touch the cover in any position. Protrusions in the vinyl will

cause stress in the fabric and cause unnecessary weak spots in the material.

Execution and Performance

Tonno Pro reserves the right to determine if all warranty conditions have been met. Upon determination, Tonno Pro may

require the product to be returned postage prepaid to further inspect the warranty claim. Given that all conditions are

met, Tonno Pro will either repair or replace (at Tonno Pro’s determination) the product or the component. In the event that

a product must be returned, our Return Authorization # must be obtained through our customer service department and

must be on the returned parcel for it to be accepted. This warranty gives you speciﬁc legal rights and you may also have

other legal rights which vary from state to state.

WARRANTY INFORMATION

To prolong the usage and function of your tonneau cover, you should check it regularly for wear, proper ﬁt, and debris

caught on the cover. Check mounting hardware regularly to insure that all clamping mechanisms are tight and secure.

1. When cleaning your tonneau cover, make sure to clean your vehicle and cover in a shaded place like under a tree or

in an open garage.

2. First ﬂood the cover with water to remove surface grit that will scratch the ﬁnish when wiped. Wash your cover with

cool, clean water and a mild soap.

3. Next, using a hose, rinse the cover well making sure to remove all traces of soap and wipe off excess water using a

sponge. Be careful to hose down the entire truck to prevent soap from streaking your truck’s paint ﬁnish. Do not use

chemicals like detergents, dish washing liquids, bleaches, harsh cleansers, strong cleaners, dry-cleaning solvents, or

any other strong chemicals as a cleanser.

4. Apply some quality vinyl cleaner that you can ﬁnd in the nearest auto shop. Using a white all-cotton towel, wash

the entire tonneau cover with the cleaner. Never spot clean your tonneau cover to avoid rings or bright spots on

your tonneau cover. Make sure that you only use a soft cotton cloth or sponge as a cleaning tool. Do not use

rough, abrasive cleaning pads because these can scratch the vinyl, creating pores that allow dirt and other unwanted

particles to stick. Do not use vinyl protectants that contain petroleum, silicone or citrus-based additives to ensure your

cover looks its best!

TONNEAU COVER MAINTENANCE

page 4