Owners manual
Please Read Before Installing!
Your satisfaction is important to us, please let us help!
If you are having any problems with your Tonno Pro Tonneau Cover, please read
the following steps to help us quickly respond to your requests.
Please take care in saving the box until after your installation is
complete. If you have ordered incorrectly, having the original box and packaging
materials will save you time and prevent possible return damages.
ORDERED INCORRECTLY - Please contact the store from which you purchased the cover and allow them to contact us
to issue a Return Authorization number. The retailer will contact us immediately and we will respond promptly. You can
call or email us to verify the correct part number needed at 1(888) 477-3729.
SHIPPING DAMAGE - Please inspect your cover carefully and do not install if you see any damage. Report the
damage to the retailer where you purchased it from. They will contact us and we will take the necessary steps to send a
new replacement cover.
BROKEN OR DAMAGE PART(S) - All parts are available for purchase on our website, www.tonnopro.com .
Select the “PARTS” option in the menu bar at the top of the page. We have included images of all the dierent parts that
are available for your cover. Your order will be shipped within 24 hours after your order is placed.
WARRANTY ISSUES - If you believe you have a warranty issue that may be considered a manufacturing defect, please
follow these instructions. For warranty details please see page 4 of this instruction booklet.
A. Make sure the product is registered on the Tonno Pro website, www.tonnopro.com/registration.
B.
Contact the Tonno Pro retailer where you purchased the cover.
C. Please have your serial number and digital images readily available to email to the Tonno Pro Retailer upon
request. This will help expedite the warranty process.
D. Please allow up to 72 business hours for further instructions on how the claim will be processed.
For easy reference please write the serial number in the boxes below. Serial numbers can be found on the driver’s side
front crossbeam.
If you have:
Plastic (composite) bed caps, remove the black rubber seal gasket before installation.
Utility rails you will need to purchase an additional bracket for your cover to fit properly. Visit
www.tonnopro.com for a complete listing of Utility Track Brackets.
Write serial
number here.
Thank you for your
Tonno Pro order!
I-SHEET NUMBER TONPRO-02 Rev. A