MSDS

Toner Plastics PLA 3D Printer Filament Page 4 of 7 Rev. 01/01/2015
PERSONAL PROTECTIVE EQUIPMENT:
Eye protection: Safety glasses with side-shields. Goggles.
Skin and body protection:
Impervious clothing.
Respiratory protection:
Respirator must be worn if exposed to dust. Wear respirator with dust filter.
Respiratory protection is needed if any of the exposure limits in Section 2 are
exceeded. Consult an industrial hygiene professional prior to respirator selection
and use. Use a positive-pressure air supplied respirator if there is any potential for
an uncontrolled release, exposure levels are not known, or any other
circumstances where air purifying respirators may not provide adequate
protection. WARNING: Air purifying respirators do not protect workers in oxygen-
deficient atmospheres.
Hand protection: Preventive skin protection.
Hygiene measures: Avoid contact with skin, eyes and clothing.
Exposure limits: See Section 2.
9. PHYSICAL AND CHEMICAL PROPERTIES:
Appearance: Clear, translucent, opaque, strand/string.
Color: Varies
Physical state: Solid
Odor: Sweet
pH: Not applicable
Vapor pressure: Not determined
Vapor density: Not determined
Evaporation rate: Not determined
Density: 1.24 g/cc
Boiling point/range: Not applicable
Decomposition temperature: 482F (250C)
Melting point/range: Not determined
Water solubility: Insoluble
Solubility in other solvents: None known
10. STABILITY AND REACTIVITY
Stability: Stable under recommended storage conditions
Conditions to avoid: Temperatures above 446F (230 °C).
Materials to avoid: Oxidizing agents. Strong bases.