Instruction Manual

Telephone: Nationwide: Fax: E-mail: Internet:
09/04
Force 3005 DBS L-Band Transport Link
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Model 3005
DBS-L-Band Transport
Model 3005 L-Band Transport Link
The Model 3005 L-Band Satellite Transport
System provides an economical solution for
transporting digital signals for numerous satel-
lite distribution applications, including headend
relocation. The system utilizes a cost-effective
coax cabling configuration to distribute the RF
signals from the dish to the transmitter and from
the receiver to the headend. The single-mode
optical fiber between the 3005 transmitter and
receiver allows transmission distances to 2 km
at 1310 nm. The transmitter has the ability to
supply LNB power at the remote dish site,
thereby decreasing the need and expense of
additional equipment. A front panel mounted
switch allows the user to select between +13
Volts and +18 Volts or disable the LNB power.
RF alarm and indicator LEDs allow for quick
assessment of the link’s operational status.
The Model 3005 L-Band Transport System,
whether used in an antenna remoting applica-
tion or in a satellite distribution role, provides for
transmission of the entire L-Band spectrum in a
simplified, flexible installation environment at
one of the lowest costs found in today’s market.
Features
Model 3005 transports the full L-Band spec-
trum (950-2200 MHz) as a standard feature.
LNB power is user-selectable as +13 Volts,
+18 Volts, or disabled; current limiting tech-
nology eliminates down time due to blown
fuses.
75 Ohm operation.
3RU rack chassis accommodates eight
transmitters and/or receivers and two power
supplies for system reliability.
System transmits signals up to 2 km and
increases the system’s value for antenna
remoting.

Summary of content (2 pages)